Page Title
End Preparation & Coupling Methods


Weld Ring Graphic Weld Ring
Added at factory on request. Prepares ends for various coupling methods.


Slip-On Flange GraphicSlip-On Flange
Prepares ends for various coupling methods.


Split Flange GraphicSplit Flange
For application to stretches of made up pipework in-situ.


Roust-A-Bout Coupling Roust-A-Bout® Coupling
A well proven, site applied temporary coupling arrangement.


Victaulic Coupling Victaulic® Coupling
Coupling applied over a weld ring



ISO 9001.2000 Certified | ASME B31.3 Certified
 

Products

NASPipe Logo

Unlike competing piping systems, NASPipe is readily available in standard sizes from 2.5 inches to 24 inches in diameter (73mm to 610mm) and lengths of 20ft and 40 ft. (6 and 12 meters).

NASPipe OverviewCustomers’ special requirements can be fulfilled in larger diameter, custom wall thicknesses and lengths up to 50 feet (15 meters).

NASPipe bends and fittings are produced to customer specifications, using standard pipe sizes. Bends up to 180 degrees, with a radius from three times the pipe diameter or greater, incorporating integral hardened tangents to any length, facilitate design flexibility. Induction bending allows multiple bends or combined bend-straight segments to be produced from a single length of pipe. Fabricated laterals, Ts and Ys are also supplied, and NASPipe accommodates all standard pipe coupling and jointing methods (see sidebar illustrations).


Product Range
NASPipe is readily available in the standard sizes listed below in 20ft (6m) and 40ft (12m) lengths up to 16" (406mm) diameter.

Normal Size O/D Wall Thickness Weight
ins Thickness ins (mm) ins (mm) lb/ft (kg/m)
2.5 Sch 80 2.87 (73) .276 (7.01) 8 (11)
3 Sch 80 3.50 (89) .300 (7.62) 10 (15)
4 Sch 80 4.50 (114) .337 (8.56) 15 (22)
5 Sch 80 5.56 (141) .375 (9.53) 21 (31)
6 Sch 40 6.63 (168) .280 (7.11) 19 (28)
6 Sch 80 6.63 (168) .432 (10.97) 29 (43)
8 Sch 40 8.63 (219) .322 (8.18) 29 (43)
8 Sch 80 8.63 (219) .500 (12.7) 43 (65)
10 STD 10.75 (273) .365 (9.27) 40 (61)
10 XH 10.75 (273) .500 (12.7) 55 (82)
12 STD 12.75 (324) .375 (9.53) 50 (74)
12 XH 12.75 (324) .500 (12.7) 65 (97)
14 STD 14 (365) 3.75 (9.53) 55 (81)
14 XH 14 (365) .500 (12.7) 72 (107)
16 STD 16 (406) .375 (9.54) 63 (93)
16 XH 16 (406) .500 (12.7) 83 (123)
18 STD 18 (457) .375 (9.53) 71 (105)
20 XH 20 (508) .500 (12.7) 79 (117)
22 STD 22 (559) .375 (9.53) 87 (129)
24 XH 24 (610) .500 (12.7) 110 (164)


Custom Fabrication
NASPipe is produced in bends and fittings to special order, using standard pipe sizes listed above. Bends down to 4" (114mm) diameter and radii from 3D upwards to permit you to design for minimum wear conditions in combination with high abrasion resistance. Fabricated laterals, T's and Y's are also available in NASPipe.


 
 
© 2006 Indutech Canada LP
[Main] [Company Info] [Products] [Services] [Downloads] [Contact]
 
  Icona Web Development & Design